Περιγραφή
Λάβετε σημαντικές πληροφορίες σχετικά με τη συμπεριφορά των επισκεπτών με το πρόσθετο Burst Statistics, τον πίνακα ελέγχου αναλυτικών στοιχείων με γνώμονα το απόρρητο από τη Really Simple Plugins.
Λειτουργίες
- Βασικές μετρήσεις: Προβολές σελίδας, Επισκέπτες, Περίοδοι σύνδεσης, Χρόνος στη Σελίδα και Παραπομπές.
- Γνώμονας το απόρρητο: Φιλοξενεία τοπικά και ανωνυμοποιημένα δεδομένα σε συνεργασία με την Complianz.
- Καταγραφή χωρίς cookies: Λάβετε δεδομένα βάση ανώνυμων παραμέτρων χωρίς να αποθηκεύονται δεδομένα σε προγράμματα περιήγησης.
- Βελτιστοποιημένο: Σχεδιασμένο για απόδοση και ελαχιστοποίηση δεδομένων.
- Ευελιξία: Έχετε τη δική σας ιδέα πώς πρέπει να μετράται το ποσοστό εγκατάλειψης; Ρυθμίστε τις παραμέτρους των δικών σας μετρήσεων.
- Ανοιχτού κώδικα: Θεωρούμε τους χρήστες μας ως συνεργάτες, οπότε μη διστάσετε να χρησιμοποιήσετε τους παρακάτω συνδέσμους για να μας βοηθήσετε να δημιουργήσουμε το καλύτερο εργαλείο αναλυτικών στοιχείων για το WordPress.
Χρήσιμοι Σύνδεσμοι
- Τεκμηρίωση
- Ορισμοί μετρήσεων
- Μεταφράστε το Burst Statistics
- Ζητήματα & αιτήματα pull
- Αιτήματα λειτουργιών
Ζήτηση υποστήριξης
Το Burst Statistics προσφέρει πλήρη υποστήριξη στο Φόρουμ του WordPress.org. Πριν ξεκινήσετε ένα νέο θέμα, παρακαλώ ελέγξτε τη διαθέσιμη τεκμηρίωση και άλλα θέματα υποστήριξης. Αφήστε μια σαφή και συνοπτική περιγραφή του ζητήματός σας και θα σας απαντήσουμε το συντομότερο δυνατό.
Σχετικά με την Really Simple Plugins
Ρίξτε μια ματιά και σε άλλα πρόσθετα που αναπτύχθηκαν την Really Simple Plugins: Το Really Simple SSL και το Complianz.
Είμαστε και στο GitHub!
Επικοινωνήστε μαζί μας εάν έχετε οποιεσδήποτε ερωτήσεις, ζητήματα ή προτάσεις. Το Burst Statistics αναπτύσσεται από την Burst Statistics B.V.. Αφήστε τα αιτήματά σας για λειτουργίες εδώ.
Εγκατάσταση
- Μεταβείτε στα ‘Πρόσθετα’ στον Πίνακα Ελέγχου του WordPress και κάντε κλικ στην επιλογή ‘Προσθήκη νέου’.
- Κάντε κλικ στη ‘Μεταφόρτωση’ και επιλέξτε το ληφθέν αρχείο .zip.
- Ενεργοποιήστε το νέο σας πρόσθετο.
- Χρησιμοποιήστε την περιήγησή μας για να εξοικειωθείτε με το Burst Statistics.
Συχνές Ερωτήσεις
-
Γνωσιακή βάση
-
Η Burst θα διατηρεί και θα αναπτύσσει μια γνωσιακή βάση σχετικά με το Burst Statistics και άλλα προϊόντα για να συνεπικουρεί, ενώ θα χρησιμοποιεί τα στατιστικά στοιχεία του Burst burst-statistics.com
-
Μπορώ να αποκλείσω διευθύνσεις IP;
-
Ναι, μπορείτε να αποκλείσετε διευθύνσεις IP στις ρυθμίσεις του Burst Statistics. Μπορείτε επίσης να εξαιρέσετε Ρόλους Χρήστη από την καταγραφή.
-
Γιατί το Burst Statistics έχει γνώμονα το απόρρητο;
-
Το Burst Statistics παρέχει έναν πίνακα ελέγχου αναλυτικών στοιχείων με ανωνυμοποιημένα δεδομένα τα οποία είναι δικά σας και αποκλειστικά δικά σας.
-
Το Burst Statistics μπορεί να χρησιμοποιηθεί χωρίς ρύθμιση των cookies ή αποθήκευση δεδομένων σε προγράμματα περιήγησης. Ωστόσο, αυτό μπορεί να επηρεάσει την ακρίβεια, γι’ αυτό είναι δυνατή μια υβριδική επιλογή με cookies κατόπιν συγκατάθεσης. Διαβάστε περισσότερα σχετικά με την Καταγραφή χωρίς cookies.
-
Επηρεάζει την απόδοση;
-
Το Burst Statistics χρησιμοποιεί ένα τελικό σημείο για την ελαχιστοποίηση των αιτημάτων κατά τη διάρκεια των περιόδων σύνδεσης. Για καλύτερη απόδοση, μπορείτε ανά πάσα στιγμή να χρησιμοποιήσετε τη ‘Λειτουργία Turbo’ που φορτώνει το Burst στο υποσέλιδο, χρησιμοποιώντας το χαρακτηριστικό defer.
-
Επιτρέπεται η παροχή σχολίων σχετικά με το προϊόν;
-
Θα θέλαμε τα σχόλιά σας. Παρακαλώ χρησιμοποιήστε την ενότητα ‘Χρήσιμοι Σύνδεσμοι’ για να επικοινωνήσετε μαζί μας. Θα θέλαμε να το αναπτύξουμε μαζί.
-
Υπάρχει έκδοση Pro;
-
Όχι… ακόμα.
Κριτικές
Συνεισφέροντες & Προγραμματιστές
“Burst Statistics – Αναλυτικά στοιχεία με γνώμονα το απόρρητο για το WordPress” είναι λογισμικό ανοιχτού κώδικα. Οι παρακάτω έχουν συνεισφέρει στη δημιουργία του.
ΣυντελεστέςΤο “Burst Statistics – Αναλυτικά στοιχεία με γνώμονα το απόρρητο για το WordPress” έχει μεταφραστεί σε 36 γλώσσες. Ευχαριστούμε τους μεταφραστές για τις συνεισφορές τους.
Ενδιαφέρεστε για την ανάπτυξη;
Περιηγηθείτε στον κώδικα, ανατρέξτε στο αποθετήριο SVN ή εγγραφείτε στο αρχείο καταγραφής αλλαγών ανάπτυξης μέσω RSS .
Σύνοψη αλλαγών
1.4.6.1
Fix: Build issue for our dashboard.
1.4.6
- New: Delete old data to manage your database disk usage.
- Improvement: Don’t add WordPress script dependencies if endpoint is working correctly, props @gauravtiwari.
- Improvement: Use fallback method for Burst endpoint test, props @ov3rfly.
- Fix: For when page id was always empty, props @huubl.
1.4.5
- Improvement: Tested up to WordPress 6.3
1.4.4
- Improvement: For checking if the endpoint works, we changed file_get_contents to wp_remote_get to prevent issues with some hosts. props @ov3rfly
- Fix: Tracking would sometimes not work properly when some data was missing like the user agent information. This has been resolved. props @ov3rfly
- Improvement: Added month to date and week to date to the datepicker. props @daanvandenbergh
- Fix: When tracking page visits as a goal, tracking would in some cases not work. This is now fixed.
- Fix: Some users could not load data due to a firewall issue. This has been resolved.
- Fix: Persian URLs would not show properly in the dashboard. This has been resolved.
1.4.3
- Fix: Fixed an issue where the REST API would not work properly and the AJAX fallback was used. This has been resolved.
- Fix: Fixed an issue where “Direct” referrers where not being displayed properly. In Czech language, this would result in referrers not showing all together. This has been resolved.
- Fix: When all tasks were completed, remaining tasks would still show 1. Now it will show 0.
- Fix: When activating Burst through the ‘bulk’ activate option, the plugin did not activate due to a fatal error. This has been resolved.
- Fix: Disabled some logs when debug mode is disabled.
- Fix: In some situations the ‘Statistics’ in the menu would not show an active state when visiting the Burst Dashboard.
1.4.2.1
- Fix: Upgrade script for 1.4.0 did not run properly. This has been resolved. The upgrade will run again.
1.4.2
- Fix: Fixed an issue where data was shown with bounces, even when bounces should be excluded.
- Fix: Fixed a fatal error in the REST API fallback. Props @helmar
- Fix: When inserting a goal, the statistics_id could be empty resulting in an error. This has been resolved.
1.4.1
- Fix: Added a fallback for when the REST API does not return a valid response.
- Fix: Translation strings were not being loaded properly.
- Fix: Date picker caused the dashboard to crash for some users. This has been resolved.
- Fix: IP block did not save IP addresses properly. This has been resolved.
- Fix: Datepicker did not select the right timezone. This has been fixed.
1.4.0
- Feature: Goals. You can now set goals for your website and track them in the dashboard.
- Feature: Filter your data by device, pages, referrers, and more.
- Improvement: Speed performance of statistics dashboard
- Improvement: WP and PHP version checks integrated with WP Core.
1.3.5
- Fix: Fixed timezone issue where there would be a mismatch between the selected date in the datepicker and the date shown up top.
- Fix: Fixed issue where referrers would not show up when Czech language was selected.
- Fix: RTL issue in some languages
- Improvement: Tested up to WordPress 6.2
1.3.4
- Fix: Removed caching of statistics due to causing multiple issues and not providing performance benefits.
- Fix: Timestamp bug where the time for today would be off by the client timezone offset has been resolved.
- Improvement: Obsolete output buffering has been removed.
- Fix: JS translations have been corrected.
- Fix: Unnecessary error logs have been removed.
1.3.3
- Fix: Timezones were not functioning correctly. Burst now utilizes the WordPress timezone setting to ensure the correct timezone is used for all dates.
- Fix: Translation plugins would occasionally alter the REST API URL, resulting in tracking with the REST API not working. This issue has been resolved by utilizing wp.apiFetch instead of fetch.
- Improvement: Previously, when an IP was blocked in the settings, a 403 error would be displayed. Now, a 202 response with a message indicating that the IP has been blocked is returned.
- Fix: Typos in the code have been corrected.
- Fix: PHP warnings that would appear upon dismissing the tour have been resolved.
1.3.2
- Fix: Cookieless tracking was not working properly. Issue where some users were not tracked.
- Fix: Qtranslate caused an error where the dashboard could not load.
- Fix: DateTime object was not properly formatted in the dashboard.
- Fix: Issue where the tracking tests would crash and display the wrong information.
- Feature: DoNotTrack & Global Privacy Control support. Added setting to honor DoNotTrack & Global Privacy Control headers.
1.3.1
- Fix: auto updates causing critical error because a required function is only loaded for logged in users
1.3.0
- Improvement: React dashboard & settings page. This helps us speed up development and improve the user experience.
- Improvement: Settings for blocking IP addresses & user roles from tracking. Props @lowym
- Improvement: Improved endpoint path. Path is now dynamic with WP_CONTENT_DIR. Props @HubertGL
- Improvement: Improved performance because of REST API optimizer for the dashboard.
- Improvement: Show all results in the datatables. Props @alfanova
- Improvement: Added RTL support.
- Improvement: Added ‘plain’ permalinks support.
- Feature: Change metrics for insights chart.
- Feature: Show hourly stats in the insights chart. Props @perties
- Feature: Show data for today in the ‘Statistics’ tab. Props @perties
1.2.3
- Fix: Fixed an issue with a translatable string
- Tested up to WordPress 6.1
1.2.2
- Fix: Fixed an issue where duplicating a WooCommerce product would copy the total pageviews from the original product.
1.2.1
- Fix: Fixed an issue where adding role capabilities would result in a fatal error.
- Fix: Post and page counts did not update, this is fixed now.
- Fix: Changed endpoint DIR to URL to prevent 404 errors on subfolder installs.
- Improvement: Delete endpoint on uninstallation.
1.2.0
- Feature: Introducing defer/footer as option
- Feature: Introducing new improved tracking method
- Improvement: Feedback notices
1.1.5
- Improvement: Changed from .less to .scss because WordPress also uses .scss
- Improvement: Update option autoload turned off on front end for better performance
- Fix: Fixed bug where UID could be empty resulting in an SQL error
- Fix: Fixed last step of shepherd tour to be inside the viewport
- Improvement: Integration with Complianz that adds burst_uid to the cookie-scanner
1.1.4
- Fix: Bounce rate calculation
- Feature: Cookieless tracking
1.1.3
- Fix: Fatal error on PHP 7.2
- Improvement: Block IP address with MU Plugin
- Improvement: Notice for REST API failure
1.1.2
- Improvement: Added drop down to datatables, props @topfgartenwelt
1.1.1
- Improvement: Added capabilities to view and/or edit burst
- Improvement: Added new devices to recognized devices
- Improvement: Added filters so that you can change the decimal and thousand separator
1.1.0
- Fix: better tracking script. Hits from one pageview can not be registered multiple times now
- Improvement: visits in pages and posts overview. As these hits are stored differently,
they will start at 0 for existing setups as well. Props: Shayne - Improvement: added parameter to clear the dashboard cache
- Improvement: added JS event to so other plugins can integrate with Burst
- Improvement: added privacy annex
- Improvement: added widget to the WordPress Dashboard Props: Shayne
1.0.2
- Fix: typo fix in generate_cached_data, props @seath
- Fix: some strings with wrong text domain
- Improvement: link in readme, props @8725z4twhugias
1.0.1
- Fix: text domain, props @bonaldi
- Fix: parse_user_agent library prefix to fix compatibility with Rank Math
1.0.0
- Initial release